Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The West Covina Owner’s Guide
We stock and install Wellborn-compatible driveway and paver components across West Covina, with typical installed paver driveway work running $7,000 – $18,000 depending on square footage, base conditions, and the paver profile you’re matching. Most Wellborn paver failures we see are spalling edges, settling sections, or faded color from sun exposure, and we can usually diagnose the issue in one visit. The most common call is a homeowner noticing a paver that’s cracked through the middle after a few years of vehicle traffic, or a section near the curb that’s sunk half an inch and now catches the car’s front lip. If you’re seeing that, you’re not imagining it, and it won’t self-correct.
Key Takeaways:
- Installed paver driveway replacement in West Covina runs roughly $7,000 – $18,000, with partial repairs starting lower.
- We carry common Wellborn paver profiles on the truck for spot repairs, and can order full pallet matches within days.
- California’s sun and clay soil do specific things to pavers, and we account for both when we spec the fix.
- We’re an independent contractor in West Covina, not a Wellborn factory service. That means faster scheduling and straight answers on whether a repair is worth it.
Which Wellborn Models This Applies To
Wellborn’s driveway and paver line splits into two broad families: their concrete paver systems (typically 60mm and 80mm profiles, with the 80mm being the one rated for regular vehicle traffic) and their thinner 40mm overlay pavers meant for patios and walkways, not driveways. That distinction matters more than people think. We’ve walked onto jobs in West Covina where a homeowner put 40mm pavers on a driveway because they liked the color, then wondered why they cracked within two years. The paver wasn’t defective. It was the wrong thickness for the load.
Identifying your exact paver means checking the back side of a lifted unit for the Wellborn mold stamp, which usually includes a series code and dimension in millimeters. If you can’t lift one safely, snap a photo of the edge profile and measure the thickness with a ruler. That gets us 90% of the way there for ordering a color and texture match. On the OEM versus aftermarket question: Wellborn’s own pavers have the tightest color consistency across batches, but there are quality aftermarket equivalents from regional California suppliers that match common colorways at 15 – 20% less. For repairs under 50 square feet, matching matters more than brand, so we’ll usually show you both options with samples before ordering. For full driveway replacements, we typically recommend staying with Wellborn’s 80mm line if that’s what’s already down.
Styles & brands we work with
Signs Your Wellborn Driveway & Pavers Is Failing
- Spalling edges or pitted surfaces: This is the classic California sun failure. UV exposure plus moisture cycling breaks down the paver’s cement surface layer over 8 – 12 years, leaving a crumbly, sandy texture on top. You’ll see it first on the sunniest part of the driveway.
- Settled or sunken sections near the curb or garage apron: That’s almost always a base failure, not a paver failure. West Covina’s clay-rich soil expands and contracts with moisture, and if the original install skimped on the crushed rock base or compaction, you get visible dips within a few seasons.
- Cracks running through multiple pavers in a straight line: A crack that follows a line across several units usually means the sub-base shifted or was never properly compacted. One cracked paver is a replacement. A line of them is a base problem.
- Weeds or ants pushing up between joints: Sand joints break down over time, and once you’ve got organic material in there, roots and insects follow. This is the early warning sign that your joint sand has failed and water is now getting under the pavers.
- Color faded unevenly across patches: If half the driveway is faded and half isn’t, you’re likely looking at a previous partial repair done with a different batch or brand. That tells us a lot about what’s original and what’s been patched.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For West Covina, a full paver driveway replacement runs $7,000 – $18,000 installed. The spread comes down to three things: how many square feet you’re covering, whether the existing base needs to be dug out and rebuilt versus simply re-screeded, and the specific Wellborn paver profile and color you’re matching. Partial repairs, like replacing a 100-square-foot settled section with new base compaction, usually land between $1,200 and $2,800 depending on what we find underneath.
Every quote includes tear-out of the failing section or full driveway, haul-away, new or graded base material, paver material, sand, compaction, and edge restraint where needed. We put the price in writing before any work starts, and that number is the number on the final invoice. If we open the base and find something that changes the job, we stop and call you before spending a dollar more. Our 365-Day Done Right Promise covers the workmanship for a full year, and if a section we repaired settles again in that window, we come back and fix it at no charge.
DIY or Call Us?
You can safely check a few things yourself: measure the paver thickness with a ruler, note where the water pools after rain, and mark any visibly sunken sections with chalk so you can show us when we’re on site. Lifting a couple of edge pavers to check the base is fine too, if you can do it without prying against neighboring pavers and chipping them. What we’d say leave to us is anything involving the base, especially if you’ve got significant settling or drainage issues. Re-compacting a clay-heavy West Covina sub-base without the right equipment and moisture control is how driveways get worse, not better. Also, a full pallet of 80mm pavers weighs north of 3,000 pounds. That’s a delivery truck and a machine, not a weekend with a friend’s pickup. If you’re not sure what you’re looking at, snap some photos, and send them over or call us at (341) 217-4204. We’d rather look at your pictures for free than hear about a driveway collapse on Monday.
FAQs
Expect 15 – 25 years from a properly installed Wellborn 80mm paver driveway in West Covina, with the lower end applying to full-south-exposure driveways that take direct UV all day. The base usually fails before the paver does, which is why we obsess over compaction and crushed rock depth. Call (341) 217-4204 for a free estimate and we’ll tell you honestly how much life your existing driveway has left.
Yes, if the base under it is still sound, individual pavers or small sections can be pulled and reset with fresh sand, and color-matched replacements can be swapped in. If the base has failed, a repair without redoing the base just moves the problem a few months down the road. We’ll tell you which situation you have when we look at it.
A full tear-out and replacement in West Covina typically takes 3 – 5 working days, including base work, paver install, compaction, and final sanding. Partial repairs are usually one day. We give you a written schedule before we start, and you’ll get photo updates as the work progresses through our Relay Standard process.
We keep the most common Wellborn colors and 80mm profiles stocked on the truck for spot repairs, and we can order full pallet quantities within a few days for larger work. If you send us a photo and thickness measurement before we arrive, you’ll know exactly what’s in stock before we show up. Call (341) 217-4204 and we’ll check what we have for your color.
Written by Luca Romano, Owner, Sawyer Remodel West Covina at Sawyer Remodel West Covina, serving West Covina and nearby areas.
