







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The West Covina Owner’s Guide
A full Tamko bathroom remodel in West Covina typically lands between $9,000 and $28,000 installed, depending on whether you’re reworking a 5×8 guest bath or gutting a primary suite with a walk-in shower and new vanity wall. Most owners find this page because a specific Tamko product failed: a shower pan that started flexing, a valve that won’t stop dripping, a surround seam that pulled away from the studs. The good news is you rarely need to replace everything. The honest answer is we match the failed part to the right replacement, fix the underlying installation issue, and you get a price in writing before a single tool comes off the truck.
Here’s how we handle Tamko-specific bathroom work in West Covina, from matching parts to pulling permits, with real numbers so you know the ballpark before you call.
Which Tamko Models This Applies To

Tamko’s bathroom line runs across two main product families: composite shower surrounds and wall systems (often sold under their Proline or AwaHara-style series depending on the year) and their waterproofing membranes used beneath tile. The compatibility gotcha most West Covina homeowners hit is this: Tamko shower pans are sized to fit standard 60×30, 60×32, and 60×36 rough openings, but the drain placement varies by model year. A pan from 2015 with a center drain won’t line up with a 2022 right-drain rough-in, even if the footprint matches. We measure the rough opening, confirm drain offset, and pull the model number off the flange under the drain cover before quoting anything.
OEM versus aftermarket is a real decision here. Tamko’s factory surrounds are solid products, but aftermarket trim kits and valve cartridges from Moen and Delta’s Tamko-compatible lines often cost 30 – 40% less while carrying the same fit tolerance. We’re happy to install either. What we won’t do is shim a mismatched pan or bury a bad seam behind caulk. Sawyer Remodel West Covina is an independent contractor, not affiliated with Tamko directly, so we stock what actually fits your rough-in. We’re honest when OEM is the only clean option and equally honest when the aftermarket part is the smarter buy.
Our trucks also carry connected lines for the rest of the job: KraftMaid vanities, Cambria and Silestone tops, all of which interface with Tamko surrounds on a standard West Covina footprint.
Styles & brands we work with







Signs Your Tamko Bathroom Remodeling Is Failing
- The shower pan flexes or creaks underfoot. This usually means the mortar bed beneath the pan wasn’t set properly, or the pan was installed over a plywood subfloor that has since shifted. In West Covina’s dry-summer, wet-winter cycle, subfloor movement is common on raised foundations near South Hills. A flexing pan eventually cracks at the drain seal.
- Water stains appear on the ceiling below the bathroom. That’s a drain gasket or pan membrane failure, not a surface caulk issue. By the time the stain is visible, the leak has been active for weeks. We trace it from the valve, the drain, and the surround corners rather than guessing.
- Surround seams are lifting or the wall panels feel spongy. Tamko panels rely on a mechanical clip system plus sealant. When the sealant fails or clips weren’t engaged at install, moisture gets behind the panel and rots the drywall or furring strip. Spongy means the substrate is already compromised.
- The mixing valve drips no matter how hard you close the handle. That’s a spent cartridge or a worn valve seat, not a handle problem. On Tamko-compatible rough-ins, hard water in West Covina (which runs 10 – 14 grains in most zones) shortens cartridge life noticeably. A $40 cartridge beats a $3,000 tee-wall repair, but only if you catch it before the drip becomes a slow leak inside the wall.
- Tile cracks along the bottom row where it meets the Tamko pan. The pan edge and the tile substrate expand at different rates. Without a proper flexible joint at that transition, the tile loses. We cut out the damaged row, install the right transition, and waterproof the intersection properly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In West Covina, a Tamko-specific bathroom remodel runs $9,000 to $28,000 installed. The spread is driven by four things: footprint, rough-in condition, product tier, and whether you’re moving plumbing. A 5×8 guest bath with a new Tamko surround, basic vanity, and existing plumbing often lands near $9,000 – $14,000. A primary bath with a walk-in shower, tile floor, new valve, and custom shower glass pushes toward $22,000 – $28,000. Small bathroom remodels in West Covina start around $5,000 when the Tamko surround can be reused and we’re replacing fixtures and finishes only.
| Scope | West Covina Installed Price |
|---|---|
| Full bathroom remodel (Tamko surround/tile, vanity, fixtures) | $9,000 – $28,000 |
| Small bathroom remodel (fixture/ finish refresh) | $5,000 – $12,000 |
| Walk-in shower conversion (Tamko pan + surround + valve) | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement (pan/surround only) | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
Every quote includes parts, labor, haul-away, and the written workmanship warranty. The price we put in writing before work starts is the price on the invoice. No change orders because we missed something during the walk-through. That’s the Relay Visibility Guarantee, and it applies to every Tamko bathroom job in West Covina.
DIY or Call Us?
You can safely check three things before anyone shows up. First, look under the drain cover with a flashlight and write down the model number stamped on the pan flange. Second, measure the rough opening wall-to-wall at the studs. Third, run the water and watch whether the valve leaks from the stem or the wall port. That diagnosis costs you ten minutes and helps us quote faster over the phone.
What you shouldn’t do is pull the surround panels or attempt a pan swap yourself. A Tamko pan sits on a mortar bed that has to be level within 1/8 inch across the full footprint. Wrong slope means standing water, which means a fast failure and a tear-out. Pan swaps also involve cutting the drain riser to the correct height, which is a plumbing job with a permit attached. Good work shows. Bad work shows up later. That’s exactly why we handle the dangerous part: removing a failed pan next to an open subfloor while matching the new drain to West Covina’s plumbing code. Call (341) 217-4204 and we’ll schedule the free estimate with a live arrival time you can track.
FAQs

A properly installed Tamko surround and pan should give you 15 to 20 years of service in West Covina’s climate, with the valve cartridge replaced every 5 – 7 years depending on hard water exposure. The main lifespan killers here are substrate movement on raised foundations and sealant failure at transitions, both of which we address during install. Call (341) 217-4204 and we’ll inspect your current setup for free.
Small surface scratches and minor drain gasket leaks can sometimes be repaired, but if the pan flexes, the mortar bed has failed, or the drain seal is torn, replacement is the only fix that won’t leak again within a year. We’ll tell you which one you’re facing after a 15-minute inspection. Estimates are free at (341) 217-4204.
A shower pan and surround swap runs 2 – 3 days including plumbing and inspection. A full bathroom remodel with tile, vanity, and glass typically runs 2 – 3 weeks from demo to final walk-through in West Covina. You’ll get a written schedule and photo updates before and after each phase.
We stock the most common Tamko-compatible pans, surrounds, valve cartridges, and transition kits on our trucks for standard West Covina rough-ins. Odd sizes and special-order finishes usually arrive within 3 – 5 business days. Call (341) 217-4204 with your model number and we’ll confirm what’s already in the truck.
Written by Luca Romano, Owner, Sawyer Remodel West Covina at Sawyer Remodel West Covina, serving West Covina and nearby areas.


