A Sawyer company - serving West Covina, CA
An open living room and dining area after a whole-home remodel

Unilock Windows & Doors Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in West Covina
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A finished backyard cottage with a small covered porch
A remodeled kitchen with painted cabinets and a farmhouse sink
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Unilock Windows & Doors: The West Covina Owner’s Guide

Unilock-compatible window and door hardware replacement in West Covina typically runs $450 – $2,500 installed, depending on whether we’re swapping a lock assembly, a full sash, or an entire pre-hung unit. Most jobs we complete same-day when the part is on our truck, which covers the common Unilock failure points. The usual story: a door suddenly won’t latch clean, a window crank spins without moving the sash, or a sliding panel starts grinding against its track. You’ve probably been fighting it for weeks. You don’t have to.

Call (341) 217-4204

We’re an independent service provider in West Covina, not a Unilock dealer. That matters because we’re not here to sell you a brand. We’re here to match the right part to your unit, install it square, and stand behind the work with a written guarantee.

Which Unilock Models This Applies To

A home office with a built-in desk and shelves

Unilock built their name on paver and retaining wall systems, but many West Covina homes we service have Unilock-branded vinyl windows and patio doors from the brand’s mid-2000s to late-2010s residential lines. The parts we replace most often come from their 200 Series and 400 Series window lines, plus the Signature sliding patio door. Here’s the compatibility gotcha: Unilock changed their roller and lock geometry between 2012 and 2014 on sliding doors, so a door built in 2013 may pull parts from either era. The only way to know for sure is the etch code on the glass corner or the label inside the frame rail. We photograph that code before we touch anything.

OEM Unilock parts are getting harder to source, especially for the pre-2012 sliding door rollers. When OEM is still available and priced reasonably, we use it. When it’s backordered or discontinued, we match with quality aftermarket equivalents that spec to the same weight rating and bore centers. You get the choice, and we tell you which direction makes sense before you spend a dollar.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Unilock Windows & Doors Is Failing

  • Door won’t latch without lifting the handle. The strike plate has shifted or the roller height has sagged. This is a geometry problem, not a lock problem. A new lock won’t fix a door that’s out of square.
  • Window crank spins but sash barely moves. The gear teeth inside the operator are stripped. It’s the most common failure on casement windows during hot West Covina summers, when expansion and contraction work the mechanism hard.
  • Sliding door grinds or jumps the track. Roller bearings have flattened. Once a steel bearing flattens, it stops rolling and starts gouging. The longer it runs, the more track damage you’re paying for.
  • Condensation between glass panes. The seal has failed, which means the insulating gas is gone and the window is now working at about half its original thermal efficiency. No cleaning fixes it; the glass unit gets replaced.
  • Lock engages but door still moves in the frame. The keeper or the latch has worn past tolerance. It’s a security issue, not just an annoyance, especially on a back patio door.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Service Installed Price Range (West Covina)
Window or door hardware swap (locks, operators, cranks) $450 – $900
Sliding door roller replacement $550 – $1,200
Full sash replacement $800 – $2,500
Pre-hung door full replacement $4,500 – $15,000 (see window replacement pricing)

The price you get from Sawyer Remodel West Covina is written and itemized before we touch a tool. Parts and labor are separate line items so you see exactly what you’re paying for. Every repair carries our 365-Day Done Right Promise: if the part fails or the install wasn’t right within a year, we come back and make it right, in writing. No call-center runaround, no “it must be a different issue” talk.

DIY or Call Us?

You can safely check the obvious: look for the label, photograph the etch code, see if screws are loose, and note where the mechanism binds. What you shouldn’t do is start pulling window sashes or sliding doors apart. A fully assembled sliding glass door weighs between 80 and 200 pounds, and when a lift wheel catches, fingers lose. We’ve also seen well-meaning DIY work strip the adjuster screws so thoroughly that what should have been a $550 roller replacement becomes a $1,800 track rebuild.

Luca Romano has been pulling windows and doors apart in West Covina long enough to know when a part is salvageable and when it’s done fighting. If you’re not sure which one you’re looking at, call (341) 217-4204 and describe what’s happening. If we can tell you the fix over the phone, we will. If it needs eyes on it, the estimate is free either way.

FAQs

An open living space after a whole-home remodel

Getting started with Sawyer in West Covina

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your West Covina team

A local crew that works across West Covina and the towns around it, to the same written standard as every Sawyer location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in West Covina? Licensed & insured · Free written quotes response · free estimates
Call (341) 217-4204
Local Service Coverage

Request a Free Estimate in West Covina

Tell us what you need - Sawyer Remodel West Covina responds fast. No obligation.

By clicking submit, you agree to our Privacy Policy and authorize us to contact you by call, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Now
Call Now - 24/7 Dispatch