Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why West Covina Homeowners Choose Mr-Glass Construction
Mr-Glass shower enclosures and glass systems hold up well in West Covina homes, but they do fail in predictable ways, usually around hard-water damage, worn rollers, and mounting points that loosen over time. We’re an independent Mr-Glass service provider in West Covina, not a manufacturer-authorized shop, which means we fix what’s actually broken instead of pushing a full replacement every time. If your Mr-Glass door is sticking, sagging, leaking, or jumping its track, call (341) 217-4204 and we’ll give you a straight answer and a written price before any work starts.
Our crews have pulled apart and rebuilt Mr-Glass Prestige Series, Elite Series, Vista Series, and Commercial Series hardware across hundreds of West Covina remodels. We know the glass thicknesses, the roller bearing sizes, the sweep profiles, and the mounting tolerances without needing a manufacturer rep on site. Whether you live in a 1960s ranch on a concrete slab near the South Hills or a newer build off Amar Road, the fix usually comes down to the same things: clean tracks, square mounting, and hardware that matches the glass weight. We put that in writing and we stand behind it for a full year.
Why Trust Sawyer Remodel West Covina for Your Mr-Glass Construction?
Luca Romano, Owner at Sawyer Remodel West Covina, grew up in East Los Angeles and trained in construction technology at LA Trade-Technical College before spending two decades doing framing, tile, and full kitchen and bath overhauls. He and his crew have pulled permits and finished jobs across West Covina for years, including South Hills projects that needed careful work in tight footprints. That hands-on remodeling background matters when a glass enclosure is out of square or a slab foundation has shifted enough to throw a door out of plumb.
Our technicians work on Mr-Glass hardware regularly, which means they recognize a seized Prestige Series roller or a stripped Commercial Series patch fitting on sight. We use OEM Mr-Glass rollers, sweeps, and hinges when local suppliers have them in stock, and we’re straightforward about switching to domestic aftermarket hardware that matches the glass weight when OEM parts are backordered or priced unreasonably. Every repair carries our 365-Day Done Right Promise in writing. If it’s not done right, we make it right. Good work shows. Bad work shows up later.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in West Covina
- Prestige Series frameless doors jumping the top track. The top pivot bracket on these doors carries a lot of load, and when a mounting hole ovalizes in the header, the whole panel shifts. We see this all over West Covina, especially in homes where kids slam the door. The fix is a stainless insert in the header plus a fresh nylon roller.
- Elite Series semi-frameless sliders with seized roller bearings. Hard water builds up on the bottom track and roller wheels, then the bearings grind themselves down. The door gets stiff, then it starts dragging. We pull the panel, replace the rollers with weight-matched hardware, and clean the track so it slides like it should.
- Vista Series fixed panels leaking at the curb. The vinyl sweep under the glass cracks from age and temperature cycles, even when it looks fine from above. Water wicks under the panel and pools outside the shower. A new sweep with the correct profile stops it, and we check the silicone at the curb joints while we’re in there.
- Commercial Series patch fittings with stripped mounting holes. On heavy-glass storefront doors, repeated tightening of the patch fitting screws eventually strips the threads in the glass or the frame. We re-thread or install threaded inserts rather than just cranking the screws harder, which always fails again.
- Glass panels pulling off misaligned wall channels. Older Elite Series installations in West Covina tract homes often had channels set slightly out of plumb. Over years, the panel drifts and the channel screws pull loose. We re-square the channel, re-anchor it, and reset the glass.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We source OEM Mr-Glass rollers, sweeps, and hinges when local suppliers in the West Covina area have them. When they don’t, or when the OEM part is priced for a full wholesale account rather than a single repair, we use domestic aftermarket hardware rated for the exact glass weight of your panel. That’s the key: a Prestige Series 3/8-inch panel needs different rollers than a Vista Series 1/4-inch fixed panel, and matching that weight spec matters more than the brand stamp on the box.
For anything over 15 years old, or any panel with a chipped edge or a stress fracture starting at a corner, we recommend full enclosure replacement. The labor to remount old tempered glass rarely beats the cost of new panels, and a chipped edge is a break waiting to happen. Here’s what Mr-Glass work costs in West Covina:
| Service | Price Range |
|---|---|
| Mr-Glass frameless enclosure replacement | $4,500 – $12,000 |
| Tub-to-shower conversion with Mr-Glass glass | $3,500 – $10,000 |
| Walk-in shower including Mr-Glass panel | $4,500 – $12,000 |
Call (341) 217-4204 for an exact quote. Estimates are free, and the number you approve is the number on the invoice.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the track, rollers, sweeps, hinges, and wall channels, and we measure the panel for plumb and square. You get a written report with the specific Mr-Glass part numbers or weight specs we recommend.
- 2
Repair or install. We bring the correct hardware for your specific Mr-Glass model line, whether that’s OEM rollers for an Elite Series slider or replacement patch fittings for a Commercial Series door. We re-anchor loose mounting points rather than reusing stripped holes.
- 3
Water test and load test. We run water along the bottom track and curb, then cycle the door a dozen times under full weight. If it binds, drags, or leaks, we fix it before we leave.
- 4
Written warranty. Every Mr-Glass repair includes our 365-Day Done Right Promise. If the same issue returns within a year, we come back and make it right at no charge.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in West Covina
We service and install the Mr-Glass Prestige Series frameless shower enclosures, Elite Series semi-frameless sliding doors, Vista Series fixed panel and inline systems, and Commercial Series heavy-glass storefront hardware. Locally, we keep common weight-matched rollers, nylon guides, vinyl sweeps, and threaded inserts on hand for fast turnaround on slider and fixed-panel repairs. For full enclosure replacements, we order glass cut to the exact opening and handle the silicone, curb, and plumb work in-house. West Covina’s hard water is rough on bottom tracks, so we also recommend sealed-bearing rollers on any replacement we do.
We Also Service These Brands
While Mr-Glass is a big part of our glass work in West Covina, we’re not a single-brand shop. Our crews install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures on the same remodels. If your shower enclosure is Mr-Glass but the vanity is KraftMaid and the countertop is Cambria, one crew handles the whole job.
FAQs – Mr-Glass Construction Service in West Covina
Yes, in most cases. The usual cause is a top pivot bracket that has ovalized its mounting hole in the header, which lets the panel drift and jump the bottom guide. We drill out the damaged hole, install a stainless threaded insert, and seat a new pivot. The glass itself usually stays. Call (341) 217-4204 if yours is doing this, and we’ll tell you what the fix looks like before you commit to anything.
We use OEM Mr-Glass rollers, sweeps, and hinges whenever our local Mr Glass service in West Covina suppliers have them in stock. If OEM hardware is backordered or priced for a wholesale account, we use domestic aftermarket parts matched to the exact glass weight of your panel. The glass weight spec matters more than the logo on the roller.
Yes. A tub-to-shower conversion runs $3,500 – $10,000 depending on the pan, tile, and whether we’re moving the drain or replacing the valve, and we can coordinate with our General Contractor team if structural changes are needed. Starting with a Mr-Glass frameless panel keeps the opening clean and matches the panel weight to hardware we already stock. Call (341) 217-4204 and we’ll walk the job with you in person.
The sweep is probably cracked where it wraps the curb corner, which is a failure point you can’t see from the top. Water wicks under the panel and escapes at the joint. We replace the sweep with the correct Vista Series profile and re-seal the curb joint with silicone rated for continuous wet exposure.
Yes. Commercial Series patch fittings and heavy-glass pivots are standard work for us. The common failure is stripped screw threads in the patch fitting after years of repeated tightening, which we fix by re-threading or installing inserts rather than cranking the hardware harder and hoping it holds.
Book Your Mr-Glass Service in West Covina, CA
If your Mr-Glass shower door is dragging, leaking, or jumping its track, call (341) 217-4204 to schedule a free estimate. We’ll send a written price before any work starts, and we stand behind every repair for a full year.
Written by Luca Romano, Owner at Sawyer Remodel West Covina, also providing Mr Glass repair in Whittier and serving West Covina since 2005.
